FAQ

Q: Hello, I want to buy the best and most expensive riflescope in Vector Optics.

A: Our Continental have the best image quality and mechanical quality.

Continental series is our very outstanding product line.

It has German glasses and the outstanding light rail system.

It is under our life-time warranty.

A: Our Frenzy-X has 2 types of footprint, TEK and MOJ.

Our Frenzy-S has 1 type of footprint, MAG.

TEK footprint is same with Docter, Vortex Venom/Viper, Burris Fastfire.

MOJ footprint is the same with Trjicon RMR.

MAG footprint is the same with Shield.

GIN footprint is the same with C-More

VOD footprint is the same with ACRO
If you have any questions about this, welcome to contact us. we can help you choose.

If the red dot did not turn on at the first time you received it, please check below 2 tips ：

#1 Is it possible to try different brand
batteries of CR2032 3.0V ? Because some customers made the feedback that their
red dots did not turn on when they put new battery inside, but the red dot turn
on normally after they put different brand battery inside.

#2 Please pull the circuit metal
contact.

If the red dots not able to turn on after several shots,
#3 Please pull the circuit metal contact

If the method above can't help you, please contact us directly by <retail@vectoroptics.com>

#1 Simple Try

(1)Please try different brand
batteries of CR2032 3.0V. Because some customers made the feedback that their
red dots did not turn on when they put new battery inside, but the red dot turn on normally after they put different brand battery inside.

(2) Please pull the metal contact.

#2 Little complex try

Step 1 : Relax the screw.

Step 2 : Put battery directly on the metal contact “+” and “-”.

Step 3 : Look Through the red dot / Take a photo.

Step 4 : Assemble ! Make sure the “·”+“0”+“|” at the same line.

If the method above can't help you, please contact us directly by<retail@vectoreoptics.com>

#1 Is it possible to help do a “Box Testing" of the adjustment?

(1) Tighten the rifle

(2) Put a paper at 100 yds(MOA) /
meters(MIL)
(3) Adjust the elevation turret from the "Up" to "Down" , adjust the windage turret from the “left”
to “right”
(4) Record the distance that reticle's movement on the paper

#2 If the “Box testing” works well. Please check below 5 tips:
(1)Are the rings installed too tightly ? (The suggested screws Torque is 15-18 Inch-pounds, Over torqueing the ring screws
will cause excess pressure on the tube, which will cause problems when adjusting the reticle/adjustment.)

(2)Has the windage or elevation turret been adjusted to the ultimate position ? For example the most left/right or the most
up/down.  (Reason : “ windage adjustment” and ” elevation adjustment ”, they are both adjusted in the same inner tube of the riflescope which means the windage or elevation adjustment will influence each other )

(3)Would like to know the height of the center of the scope from the barrel?
(4)Is it possible to tell me the distance riflescope used ? what is your bullet drop at such distance ？

(5)Have a try to exchange the position of front ring with back ring.

Many times, problems thought to be with the scope are actually mounting problems. Be sure the mounts are properly torqued
to the rifle and the scope is secured so it doesn’t twist or move in the rings.
An insufficient windage or elevation adjustment range may indicate problems with the base mount, base mount holes drilled in the rifles receiver, or barrel/receiver alignment.

If the method above can't help you, please contact us directly by<retail@vectoreoptics.com>

You can click the below link.

Zero Stop and Zero Reset

This question is related to our reticle and its adjustment （elevation and windage).We also have a blog of this 《Why can't your scope adjustment go straight?》, welcome to visit.

Prism scope is the combination of red dot sight and traditional optical scope. It’s ultra-compact size with some magnification contributes to its popularity. And you can get on your target very fast with it. This advantage is the evident in some certain shooting conditions such as CQB.

If you want to know more about this, welcome to visit our blog about this. 《WHY PRISM SCOPE?》

LPVO（Low Power Variable Optics） is very popular in whatever hunting, tactical or competition for AR and carbine users. It helps to turn your rifle into both short-range and long-range solution for shooting.
Our Constantine is LPVO and we also tested it. Welcome to visit our blog about this 《CONSTANTINE 1-8X24 TEST REVIEW》.

This question is mainly related to iron sights and tube red dot sights. It can make our shooting more accurately. Also if your red dot sight doesn't work suddenly, you also can aim correctly by the iron sights. We have a blog about this 《ABSOLUTE CO-WITNESS OR LOWER 1/3 CO-WITNESS？》， welcome to visit.

Our Scrapper and Maverick red dot sights are nice for this kind of aiming.

We summarized in to a blog about this 《MOST BENCHREST SHOOTERS IGNORED ‘IT’ DURING THEIR COMPETITION, AND YOU?》, welcome to visit.

Our Sentinel-X is designed for this specially. Welcome to buy.

Yes, of course. Our SCRD-49 and SCRD -56 are polymer red dot sights of our Frenzy-S. We test them in temperature, shock proof, dropping.

About more details , welcome to visit our blog of this《FRENZY-S POLYMER PISTOL RED DOT SIGHT TEST REVIEW》。

Your Vector Optics Continental, Taurus, Aston, Scrapper and Frenzy line products are covered by our T-VIP lifetime warranty. We will, at our option, either repair or replace your Vector Optics product without any cost if it is damaged or defective. If we can’t repair your damaged product, we will replace it with a brand new one in perfect condition. we proudly stand behind our products. You have our word that we will do what it takes to retain.

Shipment: Processing within 3 days.
Service Center: Reply in 24 hours in business day.Reply in 48 hours at weekend.
Warranty: 1 year / 5 years /  Lifetime warranty
Return: 30 days money back guarantee.

I like my product named as "vector optics' why is it changed to "victoroptics"brand

In the beginning. vector optics has always insisted on designing and building high-end optics.
As time pass by, vector optics introduced some cost-effective product to meet the need of different customers. However,price gap and quality standard between them makes consummers confused, and brand position becomes unclear.

Therefore, we classify the cost-effective products into a new brand: victoroptics

Yes, of course. If you want to become a drop shipper of our online store, welcome to contact us by <retail@vectoroptics.com>.

Vector Optics, One of the best top-rated riflescopes in the new century.
A company delivers a wide range of riflescopes, reflex sights, laser sights, range finders, mounts, lights & more.
A company has been engaged in this field more than 10 Years with tailored service, support and solution.
A company insists in products 100% detailed inspection before shipping via engineers and instruments.
A company sales turnover grows at least 25% developing more than 30 new products by RD department every year.

A company always stands behind its products spending USD 5000 on marketing and advertising every month.

Our slogan is "Be Safe, Have Fun".